- สมบูรณ์
- ชื่อผลิตภัณฑ์
- คำหลัก
- รูปแบบผลิตภัณฑ์
- สรุปข้อมูลผลิตภัณฑ์
- รายละเอียดผลิตภัณฑ์
- การค้นหาข้อความแบบเต็ม
 |
1.5 นิ้ว 1.75 นิ้ว 1.875 นิ้ว 2 นิ้ว
Ruixin
เครื่องตัดสายเคเบิล Flopetrol
โลหะผสมเหล็กและโลหะผสมนิกเกิล
ไชน่า เป่าจี้
ไวร์ไลน์ & สลิคไลน์
มาตรฐาน
Flopetrol Cable Cutter,When downhole tools are stuck and cannot be recovered, Use this tool to cut the steel wire or wire rope from the head of the rope socket.
Size | OD | FN. | Applicable wire |
1.5＂ | 1.5＂ | 1.375＂ | 0.092＂,0.108＂,0125＂ |
1.75＂ | 1.75＂ | 1.375＂ | 0.092＂,0.108＂,0125＂ |
1.875＂ | 1.875＂ | 1.75＂ | 0.092＂,0.108＂,0125＂ |
2＂ | 2＂ | 1.75＂ | 0.108＂,0125＂ |
1. If the steel wire is knotted or deformed, it will not be cut off by mistake, which can reduce the risk of operation error.
2. The tool can effectively cut the underground steel wire or wire rope near the rope cap head.
3. Replacing the taper sleeve can cut off different specifications of steel wire or wire rope, and the maximum can cut off the wire rope.
4. After cutting the steel wire or wire rope, the steel wire head can be bent, and the steel wire can be taken out together with the tool when it is pulled out.
1.Unscrew the tool holder and punch out the straight sleeve. The taper sleeve can be
2.changed as required. Pay attention to its positional relationship when installing the blade and tool holder.
Welcome to contact us at any time.
Flopetrol Cable Cutter,When downhole tools are stuck and cannot be recovered, Use this tool to cut the steel wire or wire rope from the head of the rope socket.
Size | OD | FN. | Applicable wire |
1.5＂ | 1.5＂ | 1.375＂ | 0.092＂,0.108＂,0125＂ |
1.75＂ | 1.75＂ | 1.375＂ | 0.092＂,0.108＂,0125＂ |
1.875＂ | 1.875＂ | 1.75＂ | 0.092＂,0.108＂,0125＂ |
2＂ | 2＂ | 1.75＂ | 0.108＂,0125＂ |
1. If the steel wire is knotted or deformed, it will not be cut off by mistake, which can reduce the risk of operation error.
2. The tool can effectively cut the underground steel wire or wire rope near the rope cap head.
3. Replacing the taper sleeve can cut off different specifications of steel wire or wire rope, and the maximum can cut off the wire rope.
4. After cutting the steel wire or wire rope, the steel wire head can be bent, and the steel wire can be taken out together with the tool when it is pulled out.
1.Unscrew the tool holder and punch out the straight sleeve. The taper sleeve can be
2.changed as required. Pay attention to its positional relationship when installing the blade and tool holder.
Welcome to contact us at any time.
